Tag Archive: OpenWRT

Mar 21 2015

Original firmware recovery in OpenWrt CLI

Using the program mtd: cd /tmp wget http://www.example.org/original_firmware.bin mtd -r write /tmp/original_firmware.bin firmware If you want to remove DD-WRT to install OpenWRT, you should write to the device “linux” instead of “firmware”. mtd -r write /tmp/original_firmware.bin linux

Apr 18 2014

OpenWRT TL-WR703N WAN configuration

OpenWRT TL-WR703N WAN configuration   Original config config interface ‘loopback’ option ifname ‘lo’ option proto ‘static’ option ipaddr ‘127.0.0.1’ option netmask ‘255.0.0.0’   config interface ‘lan’ option ifname ‘eth0’ option type ‘bridge’ option proto ‘static’ option ipaddr ‘192.168.1.1’ option netmask ‘255.255.255.0’

Continue reading »

Jan 25 2014

Create own openwrt firmware for Gl-iNet router

Create own openwrt firmware for Gl-iNet router Inorder to create your own customise firmware, you need a linux operating system. My favourite is uses virtualbox from Oracle, there are readily linux images in virtualbox where you can just download and open it with virtualbox and I used this image LinuxMint 16 KDE 64bit

Continue reading »

Jan 19 2014

Mini router – GL-iNet (Part -3)

Mini router – GL-iNet (Part -3) U-Boot Flashing The below steps are procedure on how to flash the U-Boot.  Please note, I’ll not responsible for your device damage or brick, do it at your own risk.   tftp 0x80060000 uboot_for_gl-inet.bin erase 0x9f000000 +0x10000 cp.b 0x80060000 0x9f000000 0x10000    

Jan 11 2014

Mini router – GL-iNet (Part -2)

Mini router – GL-iNet (Part -2) U-Boot Connect the router with TTL serial to your computer, the serial connect baud rate is 115200. Once the router is powered up, press any key immediate inside the console to get  into the U-Boot.   Exam env var in U-Boot uboot> printenv bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(ART) bootcmd=bootm …

Continue reading »

Dec 16 2013

Installing OpenWRT on a x86 PC (Part 1)

Installing OpenWRT on a x86 PC (Part 1) _______ ________ __ | |.—–.—–.—–.| | | |.—-.| |_ | – || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M —————————————————– ATTITUDE ADJUSTMENT (12.09, r36088) —————————————————– * …

Continue reading »